How electric boilers regulate temperature and pressure


Release time:

2022-08-01

The temperature of the water supply environment of the system should be controlled by the social security management system, and the water supply temperature should not exceed 45 °C, the floor heating water supply temperature should not exceed 55 °C, and the radiator water supply temperature should be around 70 °C as much as possible.

How electric boilers adjust temperature and pressure

When the electric boiler starts to heat, it is not allowed to directly heat it with water, so as to avoid the pipeline heating too fast and causing an explosion.

The heating adjustment temperature is mainly divided into feed water temperature and return water temperature.

The temperature of the water supply environment of the system should be controlled by the social security management system, and the water supply temperature should not exceed 45 °C, the floor heating water supply temperature should not exceed 55 °C, and the radiator water supply temperature should be around 70 °C as much as possible.

The temperature change of the reflux reaction is that the temperature difference between the water supply pipe and the return pipe of the heater is about 20℃, while the temperature difference between the hot water pipe and the return pipe should generally be below 10℃.

The temperature of each room is controlled by a valve, the size of the valve is adjusted, which cannot be adjusted by changing the piping, which may cause the entire heating system to be redesigned.

Electric boilers regulate pressure.

During the heating process of the electric furnace, the pressure of the pipeline is too large due to the exhaust air after the water is heated. The user needs to adjust the pressure, turn on the electric furnace, open the air outlet, and then let the air slowly flow out until the hot water comes out, then add water to heat, and then put gas.

The temperature of the electric furnace should be controlled according to the opening state and temperature requirements of the valves in different rooms, so that the valve state of the gas boiler can meet the temperature conditions in each room, and should not be changed at will after commissioning. After modification and use, the original debugging will fail and need to be re-commissioned.

 

QR code

QR code

Jiangsu Kaitong Boiler and Pressure Vessel Co., Ltd.

Address: No. 3, Fuyou Road, Huoqiao, Guangling Economic Development Zone, Yangzhou City, Jiangsu Province
Tel: 086-514-87790780  

Mobile: 13905276555 Han Jie (Chairman)     

E-mail: hanjie@jsktgl.com
Mobile: 13905272183 Qu Sheng (General Manager)
Fax: 0514-80316910
E-mail: qusheng@jsktgl.com


Copyright:Jiangsu Kaitong Boiler and Pressure Vessel Co., Ltd.