Jiangsu Kaitong Boiler and Pressure Vessel Co., Ltd.

News

Industry news

Kaitong News

Notice

Condenser: Do you clean your condenser properly?

Release time:

2022-08-01

Drain sewage, rinse with water, opencondenser.End cap, use a brush to pull back and forth on the inner wall of each condenser copper tube to clean the dirt on the inner wall of each condenser copper tube, and use a high-pressure water gun to clean each Sludge on the inner wall of the copper tube of the condenser.

　　Condenser cleaning steps are as follows:

　　1.Close the inlet valve and outlet valve of the condenser respectively to drain a small amount of water in the system.

　　2.Set up a temporary circulation system on the inlet and outlet pipes of the condenser, remove the drain valve, pressure gauge and safety valve, and use a hose to connect the circulation pump outside the tank.

　　3.After the safety descaling agent dissolves, use the pump to inject from the low water inlet, return from the water outlet, and circulate the soaking3-5hours or so. At the same time, constantly check the efficacy of the water in the water tank until there is no reaction in the water tank and the scale is fully cleaned.

　　4.Drain sewage, rinse with water, opencondenser.End cap, use a brush to pull back and forth on the inner wall of each condenser copper tube to clean the dirt on the inner wall of each condenser copper tube, and use a high-pressure water gun to clean each Sludge on the inner wall of the copper tube of the condenser.

　　If the condenser is dirty, it needs to be cleaned. It is recommended to clean once a month. Too frequent cleaning can also result in less effective condensation. First, when cleaning the condenser, stop using the condenser and turn off the power to the condenser so that there will be no safety issues when cleaning the condenser. If you clean the condenser without turning off the power, you can easily create a safety problem. Dampen a rag, then slowly scrub the condenser. Add some detergent to the water so that when scrubbing the damp cloth, you can put the condenser strong>Scrub cleaner. After scrubbing with detergent, dry the condenser with a dry cloth, then dry in a cool, ventilated place. After the condenser is completely dry, it can be powered on to continue working. Air ConditionerCondenserIt is a device for the heat exchange between the outside air and the materials in the pipe through the heat dissipation metal sheet. It is usually installed at the front of the car and at the water tank to facilitate the use of operating airflow to enhance heat dissipation. The condenser is part of the refrigeration system and is a type of heat exchanger. It can convert gas or steam into liquid and quickly transfer the heat in the pipe to the air near the pipe. The working process of the condenser is an exothermic process, so the condenser temperature is relatively high. Power plants use many condensers to condense steam from turbines. Condensers are used in refrigeration equipment to condense refrigeration vapors such as ammonia and freons. CondenserUsed in the petrochemical industry to condense hydrocarbons and other chemical vapors. During distillation, the device that converts the vapor into a liquid state is also called a condenser. All condensers operate by removing heat from the gas or steam.

　　Jiangsu Kaitong Boiler and Pressure Vessel Co., Ltd. is specialized in the production and operation of boilers and pressure vessels. , Manufacturer of non-standard containers. The main products are steam boilers, electric boilers, hot water boilers, heat exchangers, gas storage tanks, storage tanks, reactors, towers, chemical equipment, condensers, low nitrogen boilers, etc. The company was established in 2012year2Month10Day, its predecessor was Yangzhou Boiler Chemical Equipment established in 1994 The installation company, based on the corporate philosophy of "creating green energy equipment for human beings and creating technological products for the industry", always adheres to "market-oriented, innovation-driven, quality-based survival, development and growth" ; business philosophy, will rely on continuous innovation of science and technology and modern management concepts, to produce high-quality, high-performance boiler and pressure vessel products.